The Chemistry of Acrylics (2024)

Creating the perfect set of acrylics could be considered an art, but the foundation behind it — and the answers to many common technical questions — is found in the science. NAILS breaks down the chemistry behind liquid-and-powder enhancements in laymen's terms.

The Chemistry of Acrylics (1)

Liquid & Powder: The Basic Chemistry

Liquid: a monomer made mostly of ethyl methacrylate (EMA), sometimes also including other monomers and additives. A monomer (“mono” means one; “mer” means unit) is a simple molecule that is the building block for polymer chains.

Catalyst: a substance that makes the chemical reaction occur faster than it otherwise would. (It speeds up breakage of the initiator in the powder.)

Inhibitors: ingredients, typically hydroquinone, hydroquinone monomethyl ether, or butylated hydroxytoluene, that keep the monomers from joining into polymer chains before they are mixed with the powder, which would cause premature hardening.

The Chemistry of Acrylics (2)

Cross-linkers (optional): additives that let the monomers join together in a 3-D netlike structure, a stronger structure than the row of head-to-tail connections they would otherwise create.

UV absorbers (optional): additives that absorb UV light (which can cause enhancements to yellow) and change it into blue light or heat.

Flow Modifiers (optional): additives that reduce brushstrokes on the surface, causing them to self-level.

Wetting agents (optional): additives that make liquids more compatible with a solid surface, thereby improving adhesion.

* A note on odorless acrylics: More accurately described as “low odor” (because they still release vapors, even though they’re difficult to smell),odorless acrylics don’t use ethyl methacrylate. While ethyl methacrylate reacts quickly and creates a strong color-stable enhancement, the monomers used to create low-odor products react slower and are not as color stable. Because they react slowly, oxygen inhibits the cure at the surface resulting in a tacky layer called the “oxygen inhibition layer”.

The Chemistry of Acrylics (3)

POWDER: a polymer whose particles act as carriers for the below ingredients. A polymer (“poly” means many) is a long chain of monomers that have been chemically linked together.

Initiator: a molecule that absorbs extra energy and uses it to cause chemical reactions to occur; in acrylic powder, it’s benzoyl peroxide, which breaks in half when exposed to the heat of your salon or your client’s finger. Concentrations of benzoyl peroxide vary widely from manufacturer to manufacturer.

UV absorbers (optional): additives that absorb UV light (which can cause enhancements to yellow) and change it into blue light or heat.

Colorants (optional): dyes that give the powder a pinkish color. Blue colorants act as an optical brightener, which means it makes other colors appear brighter.

Titanium Dioxide (TiO2) (optional): a mineral that serves as a whitening pigment. It is used for white, not clear, powders.

The Goldilocks Complex (Too Wet, Too Dry, Just Right)

The Chemistry of Acrylics (4)
The Chemistry of Acrylics (5)

TOO WET (too much monomer liquid) — When the monomers link to each other during the chain reaction, they hug each other tightly, causing the nail enhancement to shrink. When you work with too much monomer, all of that extra monomer links together and you have excessive shrinkage of the enhancement (making it prone to lifting, tip cracking, etc.).

The Chemistry of Acrylics (6)

TOO DRY (too little monomer liquid) — When it polymerizes, the monomer holds everything together. When you don’t have enough, it’s like trying to make a cake with too little milk.

The Chemistry of Acrylics (7)
The Chemistry of Acrylics (8)

JUST RIGHT (manufacturer-recommended ratio of monomer liquid-to-polymer powder) — When the monomer polymerizes, it surrounds each bead of polymer powder. The powder works to stop cracks, reinforcing the enhancement. When you work with the correct ratio, you have enough crack-stoppers to create a durable enhancement.

* A note on fast-set acrylics: Fast-set acrylics contain more initiator and/or catalyst, which is why they set up faster. You may be tempted to use a too-wet ratio with these products to slow down their setting time. Don’t take this route, because the above rules still hold true. Switch to standard acrylics instead.

* A note on colored acrylics: Colored acrylics include additional finely ground colorant powders. This sometimes causes them to need a slightly wetter working ratio, but make sure to check the manufacturer’s instructions first.

Mixing and MatchingMeans Mixed-Up Mix Ratios (A Bad Idea)

When you mix and match liquids and powders from different manufacturers or product lines, it’s like using the wrong mix ratio. The reasons:

  • Different powders have different chemical compositions, including different levels of initiator and catalyst.
  • Too little initiator may weaken the enhancement or cause an allergic reaction.
  • Too much initiator increases the risk of brittleness and discoloration.
  • Mismatched liquid and powder can result in unreacted monomer. This monomer can soak through the nail bed to cause an allergic reaction.
The Chemistry of Acrylics (9)

The Chain Reaction

liquid mixed with powder -> the catalyst (in the liquid) breaks the initiator (in the powder) in half, creating two free radicals-> each free radical combines with a monomer, energizing it -> the energized monomer attaches to another monomer creating a covalent bond (the strongest type of chemical bond) >energy passes to the new partner monomer -> the second monomer attaches to another monomer creating a covalent bond, and on, and on, and on, creating long polymer chains -> the chains wrap around and encase each polymer powder bead, fusing the beads into the acrylic nail ->the reaction ends when there are no monomers remaining

The Chemistry of Acrylics (10)

What AreNail Primers?

PRIMER: a substance that has the ability to bond both to the nail and to other acrylics, making the nail plate more compatible with the enhancement product. The priming agent is typically dissolved in a fast-drying solvent like acetone or ethyl acetate.

Acid-based primer: primers that contain methacrylic acid, whose molecules have two arms each. One arm develops a hydrogen bond (a temporary bond) to the keratin surface, and the other arm undergoes a chemical reaction and creates a covalent bond (the strongest chemical bond) that links the primer molecule to the nail enhancement.

Mild-acid primer: primers that contain an acid that’s gentler than methacrylic acid (which is highly corrosive) and improve adhesion by creating many temporary, hydrogen bonds between the nail enhancement and the natural nail. These are sometimes erroneously dubbed “non-acid” primers. (Acid-based and mild-acid based primers can yellow enhancements.)

Acid-free primer: primers that contain no acid components and work via both arms of their molecules creating strong covalent bonds between the nail plate and the enhancement. They are non-corrosive and don’t yellow enhancements.

Primerless acrylics: adhesion promoters, like specific acrylic monomers or other additives, are added to replace the need for primers.

* A note on pre-primers: applied before a primer, a pre-primer makes the nail surface more alkaline, thereby increasing the effectiveness of the primer.

What Happens When You Remove Acrylic Nails

The Chemistry of Acrylics (11)

ACETONE is a solvent, meaning it dissolves other substances (known as solutes).

When you file down the enhancement before soaking it in acetone, it helps the solvent work in two ways: 1) there’s less product to remove, and 2) rough surfaces have more exposed surface area for the solvent to be absorbed into.

Once the acrylic nail is in the acetone, the acetone swells the polymer network until it breaks into pieces. It will be removed even faster if you scrape away pieces of softened polymer with a stick or other implement.

As a general rule of chemistry, solvents work better when they’re warm (think of how sugar dissolves faster in hot water than in cold water). But keep in mind that acetone, like most solvents, is volatile, increasing the risk of fire or lower air quality when not handled safely. Therefore, if you choose to warm acetone, DO NOT use a stove, microwave, or any open flame. Instead, place a plastic bottle with the acetone under hot running water or simply use the client’s body heat by soaking a cotton ball with acetone, placing it on the enhancement, then wrapping the cotton and finger with aluminum foil.

Solvents can become saturated (meaning they can’t dissolve any more solute), so make sure to always use fresh acetone on each client.

Before They Were Liquid & Powder

Petroleum is the raw ingredient used to create both liquid and powder. Both liquid and powder begin as a liquid monomer.

LIQUID: The liquid is prepared and synthesized from the petroleum and shipped in drums or tanker cars to the manufacturing facility.

POWDER: At the manufacturing facility, the monomer is placed in a large mixer. Water is added to dilute it. Since monomer is hydrophobic (doesn’t like water), it does not dissolve but remains suspended as tiny beads. While mixing rapidly, the initiator and catalyst are added, making the liquid monomer convert to polymer. The water is drained away, the beads dried, and additives like pigments are blended in. The powder is packaged for sale.

Other Uses for Acrylic

The same acrylic that you use to help make a living also appears in a myriad of other products.

Here are a few:

  • Hearing aids
  • Dentures
  • Lucite trophies
  • Car taillight lenses
  • Bone cement
  • Contact lenses
  • Airplane windows
  • Aquariums

Thanks to our expert sources:Doug Schoon, industry chemist and author of Face to Face With Doug Schoon;Fred Slack, NSI's director of R&D; andPaul Bryson,director of research and development at OPI

THE COMPOSITION OF POLISH

Curious how other products work? Learn all about the composition of nail polish online at www. nailsmag.com/polishbasics.

Sree Roy

Contributing Editor

Read more posts written by Sree

For reprint and licensing requests for this article, Click here.

The Chemistry of Acrylics (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Msgr. Benton Quitzon

Last Updated:

Views: 6336

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Msgr. Benton Quitzon

Birthday: 2001-08-13

Address: 96487 Kris Cliff, Teresiafurt, WI 95201

Phone: +9418513585781

Job: Senior Designer

Hobby: Calligraphy, Rowing, Vacation, Geocaching, Web surfing, Electronics, Electronics

Introduction: My name is Msgr. Benton Quitzon, I am a comfortable, charming, thankful, happy, adventurous, handsome, precious person who loves writing and wants to share my knowledge and understanding with you.